Products – sand, gravel and crushed stone from Latvia

The Akmens Dzirnavas quarry in Birzgale parish, Ogre municipality, Latvia produces 10 types of material (18 fractions and grades): fill soil, fill sand, concrete sand and washed sand, screened gravel, pebbles, oversize cobbles, crushed stone, road-base aggregates and dolomite screenings. Prices are quoted per project – for supply to Sweden, send us the material, quantity and delivery location.

Product range

Akmens Dzirnavas product range. Fractions in mm. Prices on request – deliveries outside Latvia are quoted per project.
Material Fraction Processing Sold by Swedish term
Fill soil (sand and gravel mix) natural (unscreened), screened Natural (unscreened) or screened m³ fyllnadsmassor
Draining fill sand natural (unscreened) Natural (unscreened) m³ fyllsand
Concrete sand 0/4 0/4 Screened tonne betongsand 0–4
Washed sand 0/4 0/4 Washed tonne tvättad sand 0–4
Screened gravel 0/8–0/16 0/8, 0/12, 0/16 Screened tonne grus 0–8, 0–12, 0–16 (naturgrus)
Pebbles 4/16 and 16/32 4/16, 16/32 Screened tonne singel 4–16, 16–32
Oversize cobbles 50/250 50/250 Screened (oversize) tonne kullersten 50–250
Washed crushed stone 16/42 16/42 Crushed and washed tonne makadam 16–42
Road-base aggregates 0/32–0/63 0/32, 0/45, 0/56, 0/63 (crushed mixes to order) Screened (0/32) or crushed (to order) tonne bärlager / förstärkningslager
Dolomite screenings 0/4 0/4 Crushed tonne stenmjöl 0–4 (dolomit)

Materials and their uses

Choose a material to see its fractions, typical uses and how much you need.

Fill soil (sand and gravel mix) – material texture
Fill · natural (unscreened), screened

Fill soil (sand and gravel mix)

Natural and screened fill soil for backfilling, levelling and raising ground.

Quote on request fyllnadsmassor
Draining fill sand – material texture
Sand · natural (unscreened)

Draining fill sand

Natural, free-draining sand for foundations, trenches and site fills.

Quote on request fyllsand
Concrete sand 0/4 – material texture
Sand · 0/4

Concrete sand 0/4

Screened, frost-resistant 0/4 sand for concrete, mortar and foundations.

Quote on request betongsand 0–4
Washed sand 0/4 – material texture
Sand · 0/4

Washed sand 0/4

Clean, washed 0/4 sand for screed floors, mortar and concrete.

Quote on request tvättad sand 0–4
Screened gravel 0/8–0/16 – material texture
Gravel · 0/8, 0/12, 0/16

Screened gravel 0/8–0/16

Sand-and-gravel mix 0/8, 0/12, 0/16 for concrete, paths and sub-bases.

Quote on request grus 0–8, 0–12, 0–16 (naturgrus)
Pebbles 4/16 and 16/32 – material texture
Pebbles · 4/16, 16/32

Pebbles 4/16 and 16/32

Rounded, screened pebbles for drainage, drain fields and paths.

Quote on request singel 4–16, 16–32
Oversize cobbles 50/250 – material texture
Pebbles · 50/250

Oversize cobbles 50/250

Large cobbles (5–25 cm) for bank, slope and culvert protection.

Quote on request kullersten 50–250
Washed crushed stone 16/42 – material texture
Crushed stone · 16/42

Washed crushed stone 16/42

Crushed, washed stone for roads, yards and drainage.

Quote on request makadam 16–42
Road-base aggregates 0/32–0/63 – material texture
Road-base aggregates · 0/32, 0/45, 0/56, 0/63

Road-base aggregates 0/32–0/63

Graded gravel 0/32 and crushed mixes 0/32–0/63 for roads and yards.

Quote on request bärlager / förstärkningslager
Dolomite screenings 0/4 – material texture
Dolomite · 0/4

Dolomite screenings 0/4

Fine dolomite screenings for the bedding layer under paving and for paths.

Quote on request stenmjöl 0–4 (dolomit)

Which material do I need?

Which sand is used for concrete?

Screened concrete sand 0/4 for general concrete and mortar, or washed sand 0/4 where higher quality is required. For the coarse aggregate, use screened gravel 0/16 or pebbles 4/16.

Which materials go under block paving?

Typically a draining sub-base of fill sand, a 15–25 cm load-bearing layer of crushed stone 16/42 or a crushed road-base mix 0/32–0/45, and a 3–5 cm bedding layer of dolomite screenings 0/4.

Which material is best for drainage?

Round pebbles 16/32 or washed crushed stone 16/42. Both let water through freely; drain pipes are usually surrounded with 16/32 pebbles and wrapped in geotextile.

Which material should I use for an access road?

Road-base aggregates: graded gravel 0/32 for farm and access roads, or crushed mixes 0/45–0/63 for heavier traffic. Washed crushed stone 16/42 is also used for load-bearing layers and car parks.

Made to order

If your project needs a specific fraction, mix or material properties that are not listed, we can agree on producing it to your requirements. Crushed road-base mixes 0/32–0/63 are made to order.

Buying in Latvia? Our Latvian website has the full price list: akmensdzirnavas.lv/produkcija.

Request a quote

Request a quote

Tell us the material and fraction, the quantity and where it should be delivered. We will reply with a quote for your project.

Get a quote WhatsApp